Close

CDSS0510 Manual Stacker CBD-QB-2T All-electric hydraulic truck

07-07

Manual stacker refers to various wheeled handling vehicles used for loading and unloading, stacking, stacking and short-distance transportation of stacking goods. The International Organization for Standardization is called Industrial Vehicles. The utility model has the advantages of simple structure, flexible control, good micro-movement and high explosion-proof safety performance. It is suitable for operations in narrow passages and limited spaces, and is an ideal equipment for high-bay warehouses and workshops. It can be widely used in petroleum, chemical, pharmaceutical, textile, military, paint, pigment, coal and other industries and places containing explosive mixtures such as ports, railways, freight yards, warehouses, etc., and can enter the cabin, pallet cargo loading, unloading, stacking and wagons and containers for handling operations

International Organization for Standardization called Industrial Vehicles. The utility model has the advantages of simple structure, flexible control, good micro-movement and high explosion-proof safety performance. It is suitable for operations in narrow passages and limited spaces, and is an ideal equipment for high-bay warehouses and workshops. It can be widely used in petroleum, chemical, pharmaceutical, textile, military, paint, pigment, coal and other industries and places containing explosive mixtures such as ports, railways, freight yards, warehouses, etc., and can enter the cabin, pallet cargo loading, unloading, stacking and wagons and containers for handling operations
Prohibited matters
(1) It is forbidden to operate semi-electric stackers after drinking
(2) Overloading, uneven stacking and leveling are prohibited
(3) Jumper operation is not allowed
(4) No parking on ramps or steps

 

 

Electric hydraulic forklifts are mainly forklifts designed for warehouse cargo loading and unloading. Except for a few forklifts (such as manual pallet forklifts), which are driven by human power, the rest are driven by electric motors. Because of its compact body, flexible movement, light weight and good environmental performance, it is widely used in the warehousing industry. When working multiple shifts, electric storage forklifts require backup batteries.
① Electric pallet truck
The carrying capacity is 1.6 to 3.0 tons, the width of the working channel is generally 2.3 to 2.8 meters, and the lifting height of the fork is generally about 210 mm. Mainly used for horizontal handling and cargo loading and unloading in warehouses. There are three operating modes of walking, standing and sitting, which can be selected according to efficiency requirements.
② Electric stacker
Electric stackers are divided into full-electric stackers and semi-electric stackers. As the name suggests, the former is driven, and the lift is electronically controlled, which is more labor-saving. The latter requires manual pulling or pushing of the forklift, and the lift is electric. The carrying capacity is 1.0-2.5 tons, the width of the working channel is generally 2.3-2.8 meters, and the structure is more gantry than the electric pallet handling forklift. The lifting height of the fork is generally within 4.8 meters. Loading and unloading.
③ Arrive at the forklift
The carrying capacity is 1.0-2.5 tons. The gantry can be moved forward or retracted as a whole. When the working channel is folded, the width is generally 2.7-3.2 meters, and the maximum lifting height can reach about 11 meters. cargo work.
④ Electric picking forklift
In some cases, instead of shipping the entire pallet, various types of goods are selected to form a pallet based on the order, which is called picking. According to the height of picking, electric picking forklifts can be divided into low-level picking forklifts (within 2.5 meters) and medium-high picking forklifts (up to 10 meters). Carrying capacity 2.0-2.5 tons (low position), 1.0-1.2 tons (middle and high position, with cab lift).
⑤ Low-travel three-way stacker
Usually equipped with a three-way stacking head, the forklift does not need to be rotated, and the fork can be rotated to realize stacking and picking on both sides. The width of the aisle is 1.5 to 2.0 meters, and the lifting height can reach 12 meters. The cab of a forklift cannot always be raised on the ground. Considering the limitation of the working field of view, it is mainly used for the working conditions with the lifting height less than 6 meters.
⑥ High-position three-way stacker


Similar to the low-drive three-way stacker forklift, the high-drive three-way stacker forklift is also equipped with a three-way stacking head, the aisle width is 1.5 to 2.0 meters, and the lifting height can reach 14.5 meters. The cab can be raised, and the driver can clearly observe the goods at any height, and can also carry out picking operations. The high-level drive three-way stacker forklift is superior to the low-level drive three-way stacker forklift in efficiency and performance, so this model has gradually replaced the low-level drive three-way stacker forklift.
stack
(1) Keep the goods low and be careful close to the shelves
(2) Lift the goods to the top of the shelf plane
(3) Move forward slowly, stop when the goods are above the shelf, put down the pallet at this time, pay attention to the fork not to exert force on the shelf under the goods, and ensure that the goods are in a safe position
(4) Move back slowly to make sure the tray is in a free and stable position
(5) Lower the forks to a position where the stacker can travel 

 

Electro-hydraulic forklifts refer to forklifts powered by electricity, mostly working with batteries. A battery is a type of battery whose role is to store a limited amount of electrical energy and use it where appropriate. It works by converting chemical energy into electricity. This battery is installed in the battery of the electro-hydraulic forklift. It should be noted that the battery cannot be placed horizontally! Because, the inside of the battery is generally 22%~28% dilute sulfuric acid. When placing the battery, the electrolyte will flood the plates, leaving a little room. If the battery is placed horizontally, some of the plates will be exposed to the air, which is very unfavorable for the battery plates. Generally, the observation hole of the battery or the top of the battery has an exhaust port that communicates with the outside world, so the electrolyte that is discharged horizontally from the battery can easily flow out.

Renshou Kaidifei Machinery Co., Ltd. was established on November 16, 2015 and is registered in Shigao Economic Development Zone, Renshou County. Its legal representative is Liu Chuanxiu. The business scope includes production, sales and transportation of mechanical equipment, electric vehicle accessories, auto parts, forklifts, trucks, electric vehicles, lifting platforms, lifting equipment, construction vehicles, construction machinery, mechanical and electrical equipment, agricultural machinery, and medical equipment. (The above business scope does not include pre-approval and licensing items, and operations involving post-approval or approval are based on licenses or approval documents) (Projects subject to approval in accordance with the law can only carry out business activities after approval by relevant departments)


Contact Person:Zhou Jie

Email:jieligao2021@163.com

》》》Online Store——Buy Now》》》

Disclaimer: This article is reproduced from other media. The purpose of reprinting is to convey more information. It does not mean that this website agrees with its views and is responsible for its authenticity, and does not bear any legal responsibility. All resources on this site are collected on the Internet. The purpose of sharing is for everyone's learning and reference only. If there is copyright or intellectual property infringement, please leave us a message.
©copyright 2009-2020 Vehicles Daily      Contact Us   SiteMap